Focused on the research and development and production of resin materials and resin end products - Hebei Lijiang
-
AboutHebei Lijiang Biotechnology Co., Ltd. is a new material manufacturer specializing in the production of functional special ion exchange resins and disposable blood perfusion devices. It is a modern high-tech enterprise integrating the research and development, production, sales, and service of resin materials and resin end products. The company was established in April 2014 with a registered capital of 52 million yuan. It plans to cover an area of 267 acres and is located in the High-tech Industrial Park of Weixian County, Hebei Province—New Material Demonstration Park. The total investment is 510 million yuan. It is a council member unit of the Ion Exchange Resin Branch of the China Membrane Industry Association.
-
Product
-
BlogsThe company will focus on the high-end market, with the purpose of serving society, solidly carrying out technological innovation and product promotion, continuously improving the development and expansion of ion exchange resin products in emerging application fields, thereby promoting the upgrading and development of related industries.
-
Company AlbumThe current phase of construction has been fully completed and put into operation, featuring a comprehensive workshop with 42 production lines for functional ion exchange resins with an annual output of 16,800 tons and a production capacity of 30,000 tons, a wastewater treatment plant with an annual treatment capacity of 403,000 tons, and a workshop producing 5,000 tons of medical-grade magnesium sulfate annually. Trial production began in July 2016, with official production starting in January 2017.
Share to:
AB-8
You can also leave us a message to get updated product information.
More similar products:
Product Keywords:
- Product Description
- Contact Us
-
AB-8 Product Manual
1. Product Introduction:
The AB-8 type macroporous adsorption resin is a styrene-based weakly polar copolymer (crosslinking agent is divinylbenzene, monomer is methyl acrylate, pore-forming agent is toluene, etc.).
Suitable for extraction, separation, and purification of water-soluble weakly polar substances, such as stevioside, alkaloids, etc.
Structure ： PSD
2. Product Technical Specifications:
Index Name
Index Parameter
Appearance
Milky white opaque spherical particles
Polarity
Weak polarity
Moisture Content
65-75%
Particle Size Range
(60-16 mesh) 0.3-1.25 mm ≥90%
Average Pore Diameter
13-14 nm
Pore Volume
0.73-0.77 ml/g
Porosity
42-46%
Apparent Density
0.44-0.48 g/ml
Skeleton Density
1.13-1.17 g/ml
Wet True Density
1.05-1.09 g/ml
Wet Apparent Density
0.65-0.70 g/ml
Specific Surface Area
≥480 m²/g
Adsorption Capacity
≥45 mg/g (phenol/dry basis)
3. Product Features :
1. Milky white or light yellow color facilitates handling operations, making it easy to observe during separation and purification of colored organic compounds.
2. Physicochemical properties are stable; insoluble in any acid, alkali, or organic solvents. , Convenient for selection of adsorbents and desorbents.
3. Good selectivity for organic substances; not affected by the presence of inorganic salts.
4. Easy regeneration; regenerants can be water, dilute alkali, dilute acid, or low boiling point organic solvents such as methanol, ethanol, acetone, etc.
5. Good mechanical strength and long normal service life.
4. Resin Pretreatment:
Industrial grade resin contains residual inert solvents, so before use, different degrees of pretreatment are required according to application needs: add ethanol 10-20 cm above the resin layer in the extractor for soaking. 10-20 centimeters of ethanol soaking above the resin layer 3-4 hours, then drain the soaking liquid for the first extraction process. Repeat washing by the same method until the soaking liquid collected at the outlet, when mixed with several times the volume of water in a test tube, is clear without turbidity. Then rinse thoroughly with clean water until no obvious ethanol odor remains, then it can be used normally. After packing the resin column, backflush with water to expel gases in the resin to avoid gas blockage affecting adsorption. 3 Backflush with water to expel gases in the resin to avoid gas blockage affecting adsorption.
5. Enhanced Regeneration:
When the resin's adsorption capacity decreases after normal use for a certain period or is severely contaminated acutely, enhanced regeneration is needed. The method is to add 10-20 cm above the resin layer 10-20 centimeters of 3-5% hydrochloric acid solution soaking 2-4 hours, then rinse with the same concentration 5-7 times the volume of hydrochloric acid solution, then rinse thoroughly with clean water until the outlet wash solution's pH is neutral, then soak with sodium hydroxide solution by the above method for 5% hours, and rinse with the same method until rinsed with 2-4 times the volume of sodium hydroxide solution, then rinse thoroughly with water until the effluent's 5-7 pH pH is neutral, then it can be put back into use.
6. Precautions:
1. This resin contains moisture; storage and transportation should maintain a temperature of 5-40 º C to prevent freezing at low temperatures and mildew at high temperatures, which would affect use.
2. Resin should not be directly injected with water if it is exposed to air or loses water for some reason, to avoid resin floating. It can be treated by soaking in ethanol to restore its wet state, then rinsed clean with water.
3、 Adsorbate ( Solution ) Before loading onto the column, impurities should be removed, and the solution should be filtered and clarified. , Avoid impurities entering the resin column as much as possible. , To prevent acute poisoning of the resin. , Affect usage.
4. When resin use is interrupted, it should be washed clean with water, soaked and stored in clean water, and the water should be changed regularly to prevent contamination. It can also be soaked in saturated saline or ethanol for long-term storage.
AB-8
You can also leave us a message to get the latest product information!
Similar Products:
Product Keywords:
Consult Now
If you are interested in our products, please leave your email, and we will contact you as soon as possible, thank you!