
Share to:
001×7H
You can also leave us a message to get updated product information.
More similar products:
Product Keywords:
- Product Description
- Contact Us
-
1. Product Introduction:
00 1×7 H It is a gel-type strong acid cation exchange resin with a polystyrene skeleton, containing sulfonic acid groups, equivalent to solid sulfuric acid. Mainly used in the water treatment industry.
2. Performance Indicators:
Appearance
Light yellow transparent spheres
Functional Group
-SO3H
Delivery Form
H+
Total Exchange Capacity
≥5.0 mmol/g
Volume Exchange Capacity
≥1.75 mmol/ml
Moisture Content
51%~56%
Wet True Density
1.17~1.22 g/ml
Wet Apparent Density
0.73~0.83 g/ml
Particle Size Range
0.315~1.25 mm
Effective Particle Size
0.40-0.70 mm
Uniformity Coefficient
≤1.6
Sphericity Rate
≥60%
3. Reference Operating Conditions:
Maximum Operating Temperature
100℃
Resin Bed Height
1~3 m
Operating Flow Rate
2~10 BV/h
Backwash Flow Rate
4~10 BV/h
Regeneration (Desorption) Flow Rate
1~2 BV/h
Regenerant Dosage
2 BV of 3~5% HCl, 2 BV of 2~4% NaOH
4. Product Applications:
Water Softening
Pure Water Preparation
Hydrometallurgy
Rare Element Separation
5. Precautions:
1. Transportation and Storage of the Product:
The product should be stored wet, preferably at temperatures above 0°C; if unused for a long time, it can be sealed or stored in 5% the above brine; during transportation, mainly prevent freezing, and do not place heavy objects on the resin to avoid crushing.
2. Resin Pretreatment:
Generally, alkali -water - acid - water can be used in one process; for strict requirements, three cycles should be performed, finally treating to the required ion form.
3. Resin Loading:
Consider the resin's swelling rate during ion exchange, reserve enough space to prevent overflow and ensure proper liquid level; the column diameter ratio should be reasonable to avoid channeling; use wet loading or backwash to remove air bubbles inside the resin bed.
4. Before liquid enters the resin column, it should undergo flocculation, filtration, or sand filtration to ensure no suspended solids, preventing blockage of resin pores.
5. Resin unused in the column for a long time must be cleaned and removed for storage, or stored in saltwater in a salt-resistant medium, keeping the surface from drying out; periodic backwashing is also needed to loosen the resin and prevent caking and spoilage.
001×7H
You can also leave us a message to get the latest product information!
Similar Products:
Product Keywords:
Consult Now
If you are interested in our products, please leave your email, and we will contact you as soon as possible, thank you!